Demulsifier - GW series

This product is a new demulsifier specially developed for emulsions, and its principle is to damage the emulsion by partial substitution of the stabilizing film. With the strong demulsification and flocculation effect, it can achieve rapid demulsification and flocculation, COD removal, oil removal and flocculation effect for the oil-in-water emulsion wastewater.

1.It has good floc sedimentation effect, and can achieve fast separation of oil and water;

2.No special requirement on equipment and facilities, simple and easy to operate;

3.Wide range of application;

4.Low requirement on water quality.

GW 105 fast oil and water separation

GW 108 polyelectrolyte demulsifier

Adjust the raw water pH to 7 above, add an appropriate amount of this product, let it react for 10-15 min, add a specified amount of PAC and PAM successively, and after flocculation and sedimentation, observe the water quality;

Way of dosing: directly dose;

Dosage: The dosage depends on the type of wastewater;

Dosing place: the demulsification tank in the sewage pretreatment section is generally selected.

25 kg/barrel, or as required by users;

Pay attention to moisture-proof, rain-proof and sealed packaging;

Avoid contact with skin, eyes and other body parts during operation, if splashed in accidentally, rinse immediately with plenty of clean water, and see a doctor in time;

Store it in a cool and dry place.

Treatment of wastewater in the petrochemical engineering, iron and steel, hardware, machining, surface treatment, daily-use chemicals and other industries.