COD remover – OR 306

This product is a new environment-friendly water purification agent, which has an extremely strong adsorption capacity, and can quickly conduct adsorption reaction with organic matters in water to remove the COD in water through a series of functions such as bridging principle, coagulation and adsorption, and flocculation. This product is convenient to use, environment-friendly, nonhazardous and easily biodegradable, and will not cause secondary pollution to the environment.

Applicable fields: treatment of wastewater in the electronics, electroplating, printing and dyeing, pharmaceutical, circuit board, food, textile, leather making, chemical engineering and other industries.

1.It has low influent water requirements, wide applicable pH range (3-11);

2.It has certain removal rate of COD, 20%-60%;

3.It is widely applied in industries: applicable to the treatment of wastewater in all kinds of industries (electronics, electroplating, printing and dyeing, pharmaceutical, circuit board, food, textile, leather making, chemical engineering, etc.);

4.No production of other pollutant;

5.It has a certain remove effect on dissolved matters with over-standard COD.

Appearance: Yellow, orange-yellow

Odor: No odor changed to slight odor

PH: 3.0-5.0 (25℃, 1%) aqueous solution

Solubility: Soluble in water

Dosing method: Directly pumped into the reaction tank on site;

Dosage: the specific dosage needs to be determined through test according to the COD content in wastewater;

Service conditions: the applicable pH value of water is 3-11, the dosing effect is better in neutral to slightly alkaline, and the project needs to be used with polymeric flocculant.

25 kg/barrel, or as required by users;

Pay attention to moisture-proof, rain-proof and sealed packaging;

Store it in a cool and dry place, with a recommended storage temperature of 10-30℃ and a storage time of 6 months.