Ammonia-nitrogen remover – WN 801

This product is mainly used to remove the ammonia nitrogen in wastewater, and after addition, the ammonia nitrogen in wastewater will generate nitrogen, nitrogen dioxide, nitric oxide and water that are insoluble in water. The catalyzing components in this product transform the ionic ammonia nitrogen in wastewater to free ammonia nitrogen, and have the effect of assisting in COD removal and decoloration. The reaction process can complete in 2-10 min, without residues and with a high removal rate.

Applicable fields: applicable to the treatment of wastewater in all kinds of industries (electronics, electroplating, printing and dyeing, circuit board, chemical fertilizer plant, textile, leather making, cultivation, slaughtering, etc.).

1.It is convenient to use, with no need of additional treatment processes;

2.It reacts quickly, and can complete the reaction process in 2-10 min;

3.The removal rate of ammonia nitrogen can reach more than 95%;

4.It has functions of decoloration, COD reduction, etc.

Appearance: White powder or particle

Odor: Odorless

PH: 5.0-7.0 (25℃, 1% aqueous solution)

Solubility: Soluble in water

Dosing method: Dispense the aqueous solution based on a proportion of 5-20%, and dose it with a dosing pump;

Dosage: the dosage of ammonia nitrogen with a reduction of 100 mg/L is generally 800-1,000 ppm, and the specific dosage needs to be determined through test according to the different types of wastewater;

Service conditions: it is recommended to dose in the sand filtering tank or clean water tank at the rear end of the sedimentation tank, in combination with stirring or aeration.

25kg/bag, or as required by users;

Pay attention to moisture-proof, rain-proof and sealed packaging;

Avoid contact with skin, eyes and other body parts during operation, if splashed in accidentally, rinse immediately with plenty of clean water, and see a doctor in time;

Store it in a cool and dry place, with a recommended storage temperature of 10-30℃.