Coagulant – Ultrafloc 50DA

This product can effectively reduce the chroma, COD and turbidity in complex organic wastewater; and is widely used in the wastewater system of pharmaceutical, printing and dyeing, coal chemical, papermaking, refining and chemical and other industries. It is a kind of powerful coagulant.

1.It can effectively capture anionic trashes in wastewater;

2.It has strong bridging effect;

3.It has excellent coagulation effect;

4.It can obviously reduce the usage of inorganic coagulant of polyaluminium chloride or polymeric molysite;

5.It has effective and distinct decolorization and clarification effect;

6.It saves the dosage, and reduces the transportation and storage cost;

7.It is easy to add.

Appearance：Colorless to light yellow transparent liquid

Solid content：>40

PH：<7.0(25℃)        

Specific gravity：1.15-1.35 ( g/cm3 , 20℃ )

The product can either be packaged in 200 kg/barrel, or be packaged in 25 kg/barrel and 1,000 kg/IBC barrel as required;

The product is recommended in its original package and stored in a cool, dry and ventilated environment; and the ambient temperature is recommended to be 4-35℃;

If this product is frozen at low temperature, please heat it to room temperature until it is completely dissolved before use;

The shelf life of this product is 12 months under recommended storage conditions.

The product is relatively thick, but is soluble in water. It can be simply added with water to stir and dilute, and then pumped into the system. The dilution ratio should be calculated according to the dosage, and the general dilution rate is 10%.

This project is a chemical agent, and is strictly prohibited to be placed in a humid and hot place exposed to sunlight and rain; It is strictly prohibited to be placed with reductants;

In case of any special circumstance, contact the pharmaceutical engineer in time to solve it.