Phosphorus removal agent - WP 913
PRODUCT INTRODUCTION
This product is a compound high-molecular polymer, with large molecular structure, strong adsorption capacity and superior water purification effect to traditional inorganic water purification agents. After the addition of raw water, the formed flocculating constituent is big, the precipitation rate is fast, the activity is high, and the filterability is good; the product has strong adaptability to various raw waters and has less effect on the pH value of water.
Applicable fields: applicable to the treatment of wastewater in all kinds of industries (electronics, electroplating, printing and dyeing, circuit board, chemical fertilizer plant, textile, leather making, cultivation, slaughtering, etc.).
PRODUCT CHARACTERISTICS
1.It has double functions of phosphorous removal and flocculation, and the effluent phosphorus stability is less than 0.5 ppm;
2.It is less corrosive to equipment and pipeline and convenient to operate, with less dosage and low purification cost;
3.It can be used to adjust the pH value of water and improve the water quality;
4.It can be used as a flocculant to improve the settling ability.
Appearance: Sepia liquid
Odor: Odorless
Solubility: Soluble in water
Specific gravity: 1.4-1.5 (g/cm3, 20℃)
METHOD OF USE
Dosing method: Directly pumped, after thoroughly stirred, coagulate and settled, the effluent phosphorus reaches the standard; in case of high raw water concentration and big water treatment capacity, the dosage can be properly adjusted;
Dosage: 0.1-3‰, specifically depending on the field condition;
Service conditions: for some strongly acidic (pH<5) or="" strongly="" alkaline="" ph="">11) raw waters, firstly adjust the pH value to 6-9, and then add the phosphorus removal agent for coagulation sedimentation.
PACKAGING.STORAGE AND PROTECTION
25 kg/barrel, tank truck or as required by users;
Avoid contact with skin, eyes and other body parts during operation, if splashed in accidentally, rinse immediately with plenty of clean water, and see a doctor in time;
Store it in a cool and dry place, with a recommended storage temperature of 10-30℃.
PRECAUTIONS
When the pH of influent water is acidic or alkaline, adjust the pH value to 6-9; It is strictly prohibited to store it with strong acids, strong alkalis and oxides; In case of any special circumstance, contact the pharmaceutical engineer in time to solve it.